how to install ring doorbell wired

The Ring Doorbell Wired is an excellent security addition to any home, offering motion detection, video recording, and two-way communication, all accessible via a smartphone app. While installing a Ring Doorbell might seem like a challenging task, it’s quite simple once you understand the steps involved. In this guide, we’ll walk you through how to install your Ring Doorbell Wired, ensuring that you get it set up safely and correctly.

Quick Overview of Steps:

1. Turn off the power to the doorbell system.
2. Remove the existing doorbell.
3. Install the Ring Doorbell Wired.
4. Connect the wires to the doorbell.
5. Attach the doorbell to the mounting bracket.
6. Restore power and complete the setup on the Ring app.

Tools and Materials You’ll Need:

Before you begin, make sure you have the following tools and materials ready:

• Screwdriver (typically included with the Ring Doorbell)
• Drill (if required for new holes)
• Level (optional)
• Voltage tester (to ensure power is off)
• Wire extensions (if the existing wires are too short)
• Your smartphone (to complete the installation via the Ring app)

Now that you have the tools ready, let’s dive into the detailed steps.

Step 1: Turn Off Power to the Doorbell System

Safety first! Before you start working with any electrical components, you need to cut off the power supply to your doorbell system to avoid any electrical shocks.

1. Locate your home’s circuit breaker.
2. Turn off the switch that controls power to the doorbell circuit. This is typically labeled as “doorbell” or “front entry” on your breaker panel.
3. Use a voltage tester to check if the wires are still live. This will confirm that there is no power running through the wires.

If you’re unsure about turning off the power or working with electricity, it’s always best to consult a professional electrician.

Step 2: Remove the Existing Doorbell

Once the power is off, the next step is to remove the old doorbell to make room for the Ring Doorbell Wired.

1. Unscrew the faceplate of your old doorbell using a screwdriver.
2. Pull the doorbell gently away from the wall to expose the wiring.
3. Disconnect the wires from the back of the doorbell. There will typically be two wires: one for power and one for the chime.

Take note of which wire is connected to each terminal, as this will help you when connecting the Ring Doorbell later.

Step 3: Install the Ring Doorbell Wired Mounting Bracket

Now that the old doorbell is removed, it’s time to install the mounting bracket for your Ring Doorbell Wired.

1. Position the mounting bracket where the old doorbell was, aligning the holes with the existing screw holes if possible. If you need to drill new holes, use the bracket as a guide to mark where to drill.
2. Using the provided screws, secure the mounting bracket to the wall.
   • Pro Tip: Use a level to ensure the mounting bracket is straight before securing it.
3. If your existing wires are too short to connect easily, use the provided wire extensions.

Step 4: Connect the Wires to the Ring Doorbell Wired

With the bracket in place, the next step is to connect the doorbell wiring to your Ring Doorbell.

1. Loosen the terminal screws on the back of the Ring Doorbell Wired.
2. Attach the existing doorbell wires to the terminals on the back of the Ring Doorbell.
   • It doesn’t matter which wire goes to which terminal as long as they’re both connected.
3. Tighten the screws to secure the wires in place.

If the wiring is not secure, the doorbell may not receive power, so ensure that the connections are tight.

Step 5: Attach the Ring Doorbell to the Mounting Bracket

Now that the wiring is in place, it’s time to mount the Ring Doorbell onto the bracket.

1. Align the bottom edge of the Ring Doorbell with the mounting bracket.
2. Push the doorbell firmly into place until it clicks.
3. Once the doorbell is mounted, use the provided security screws to secure the bottom of the Ring Doorbell to the mounting bracket. This prevents theft and tampering.

Step 6: Restore Power and Set Up the Ring App

With the doorbell installed, it’s time to restore power and set it up on your smartphone using the Ring app.

1. Go back to your circuit breaker and turn the power back on.
2. The Ring Doorbell will light up, indicating that it is receiving power.
3. Download the Ring app from the App Store (iOS) or Google Play (Android).
4. Follow the in-app instructions to connect the doorbell to your Wi-Fi network and complete the setup.

The app will guide you through naming your device, setting up motion detection zones, and linking it to any other smart devices you may have.

Additional Tips for a Smooth Installation

• Check Your Wi-Fi Signal: The Ring Doorbell Wired requires a strong Wi-Fi connection to function properly. Ensure that your router is close enough to the doorbell, or consider using a Wi-Fi extender if the signal is weak at your front door.
• Motion Detection Settings: After installation, use the Ring app to adjust motion sensitivity. This will help reduce false alarms triggered by passing cars or pedestrians.
• Secure the Chime Kit (if needed): Depending on your home setup, you may need to install a Ring Chime kit to work with your existing chime. Consult your Ring manual for specific instructions if this is required.

Troubleshooting Common Issues

Even with careful installation, some issues may arise. Here’s how to address common problems:

1. No Power to the Doorbell:
   • Check if the wires are properly connected to the terminals on the back of the doorbell.
   • Make sure the breaker has been turned back on after installation.
   • If the doorbell still doesn’t power on, try using a voltage tester to ensure the wires are live.
2. Weak Wi-Fi Signal:
   • Ensure your router is close enough to the doorbell.
   • Use a Wi-Fi extender to boost the signal.
   • Check the signal strength in the Ring app under “Device Health.”
3. Motion Detection Issues:
   • Adjust the motion detection zones and sensitivity in the Ring app.
   • Avoid pointing the camera directly at the street, where passing cars can trigger alerts.
4. Video Quality Problems:
   • Check your internet speed. Ring recommends at least 2Mbps upload speed for optimal video quality.
   • If the video is choppy, lower the resolution in the app or reduce the number of devices using your network.

Table: Ring Doorbell Wired Installation Steps Overview

Step	Description	Estimated Time	Tools Needed
Turn off power to doorbell	Turn off the breaker to avoid electrical shock	5 minutes	Circuit breaker, voltage tester
Remove existing doorbell	Unscrew and disconnect the existing doorbell	10 minutes	Screwdriver
Install mounting bracket	Attach the mounting bracket where the old doorbell was	10-15 minutes	Screwdriver, drill (if needed)
Connect doorbell wires	Attach the wires to the back of the Ring Doorbell	5 minutes	Screwdriver
Attach doorbell to bracket	Snap the Ring Doorbell into place and secure it with screws	5 minutes	Security screws
Restore power and set up app	Turn the power back on and complete the setup in the Ring app	10 minutes	Smartphone

---

Conclusion

Installing the Ring Doorbell Wired is a straightforward process when broken down into clear steps. From turning off the power to securely mounting the doorbell and completing the setup in the app, this guide has covered every aspect to ensure your installation goes smoothly. With safety precautions in place and attention to detail, you’ll have your Ring Doorbell Wired installed in no time, providing your home with enhanced security and convenience. If you follow the steps outlined above, you’ll not only install your Ring Doorbell successfully but also avoid common pitfalls and troubleshooting headaches.

Now that your Ring Doorbell Wired is up and running, you can enjoy the peace of mind that comes with monitoring your home from anywhere, anytime.